HP ProDesk 400 G5 Micro Maintenance and Service Guide - Page 50
Speaker, from the system board.
![]() |
View all HP ProDesk 400 G5 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Speaker Follow these steps to remove the speaker: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 31). 2. Remove the access panel (see Access panel on page 32). 3. Remove the front bezel (see Front bezel on page 35). 4. Remove the drive cage (see Drive cage on page 36). Remove the speaker: 1. Position the computer with the front panel toward you. 2. Disconnect the speaker cable (1) from the system board. 3. Remove the two Torx-15 M3.0×9.0 screws (2) that secure the speaker to the computer chassis. 4. Remove the speaker (3). Reverse this procedure to install the speaker. 44 Chapter 4 Removal and replacement procedures
![](/manual_guide/products/hewlettpackard-prodesk-400-g5-micro-maintenance-service-guide-04d2e03/50.png)
Speaker
Follow these steps to remove the speaker:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
31
).
2.
Remove the access panel (see
Access panel
on page
32
).
3.
Remove the front bezel (see
Front bezel
on page
35
).
4.
Remove the drive cage (see
Drive cage
on page
36
).
Remove the speaker:
1.
Position the computer with the front panel toward you.
2.
Disconnect the speaker cable
(1)
from the system board.
3.
Remove the two Torx-15 M3.0×9.0 screws
(2)
that secure the speaker to the computer chassis.
4.
Remove the speaker
(3)
.
Reverse this procedure to install the speaker.
44
Chapter 4
Removal and replacement procedures