HP ProDesk 400 G5 Micro Maintenance and Service Guide - Page 46
Fan, Remove the fan
![]() |
View all HP ProDesk 400 G5 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Fan Follow these steps to remove the speaker: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 31). 2. Remove the access panel (see Access panel on page 32). 3. Position the computer with the front panel toward you. 4. Disconnect the fan cable (1) from the system board. 5. Remove the three Phillips screws (2) that secure the fan to the computer chassis. 6. Remove the fan (3). Reverse this procedure to install the fan. 40 Chapter 4 Removal and replacement procedures
![](/manual_guide/products/hewlettpackard-prodesk-400-g5-micro-maintenance-service-guide-04d2e03/46.png)
Fan
Follow these steps to remove the speaker:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
31
).
2.
Remove the access panel (see
Access panel
on page
32
).
3.
Position the computer with the front panel toward you.
4.
Disconnect the fan cable
(1)
from the system board.
5.
Remove the three Phillips screws
(2)
that secure the fan to the computer chassis.
6.
Remove the fan
(3)
.
Reverse this procedure to install the fan.
40
Chapter 4
Removal and replacement procedures