HP ProDesk 600 G1 EliteDesk 800 G1 Desktop Mini ProDesk 600 G1 Desktop Mini Ma - Page 50
Type 2, Plug in the computer and turn on power to the computer. - release date
View all HP ProDesk 600 G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Type 2 a. Push the battery toward the outside of the chassis to release it from the holder and lift it out. b. Lower the battery so that is next to the holder then push it into the holder. NOTE: After the battery has been replaced, use the following steps to complete this procedure. 5. Replace the computer access panel. 6. Plug in the computer and turn on power to the computer. 7. Reset the date and time, your passwords, and any special system setups using Computer Setup. 8. Lock any security devices that were disengaged when the computer access panel was removed. 42 Chapter 5 Removal and Replacement Procedures
Type 2
a.
Push the battery toward the outside of the chassis to release it from the holder and lift it out.
b.
Lower the battery so that is next to the holder then push it into the holder.
NOTE:
After the battery has been replaced, use the following steps to complete this procedure.
5.
Replace the computer access panel.
6.
Plug in the computer and turn on power to the computer.
7.
Reset the date and time, your passwords, and any special system setups using Computer Setup.
8.
Lock any security devices that were disengaged when the computer access panel was removed.
42
Chapter 5
Removal and Replacement Procedures