HP ProDesk 600 G1 EliteDesk 800 G1 Desktop Mini ProDesk 600 G1 Desktop Mini Ma - Page 66
Updating SMBIOS Information, Security, System ID's, To update SMBIOS information in Computer Setup
View all HP ProDesk 600 G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
12. Lift the left side of the system board, and then remove it from the computer (2). To install the system board, reverse the removal procedures. Updating SMBIOS Information When replacing the system board, you must reprogram the SMBIOS information on the affected computer. Failure to reprogram the board will result in eventual failure, such as an activation failure (need to reactivate the system) or a system recovery failure. To update SMBIOS information in Computer Setup: 1. Turn on or restart the computer. 2. Press Esc while the "Press the ESC key for Startup Menu" message is displayed at the bottom of the screen. NOTE: If you do not press Esc at the appropriate time, you must restart the computer and again press Esc when the monitor light turns green to access the utility. 3. Press F10 to enter Computer Setup. 4. Go to Security > System ID's. 58 Chapter 5 Removal and Replacement Procedures