HP ProDesk 600 G1 EliteDesk 800 G1 Desktop Mini ProDesk 600 G1 Desktop Mini Ma - Page 51
Heat sink, Be sure the loosen the screws in the order indicated by the numbers stamped on
View all HP ProDesk 600 G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Heat sink Description Heat sink Spare part number 768426-001 The heat sink is secured with four captive Torx screws. Be sure to remove and replace the screws in the order indicated on the heat sink. To remove the heat sink: 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 25). 2. Remove the access panel (see Access panel on page 26). 3. In the order indicated on the heat sink, loosen the four captive Torx screws (1), and then lift the heat sink out of the computer (2). CAUTION: Be sure the loosen the screws in the order indicated by the numbers stamped on the heat sink. CAUTION: To reduce a degradation in thermal performance, be sure not to touch the thermal grease on the surface of the processor or the heat sink. To replace the heat sink, reverse the removal procedures. Heat sink 43