HP ProLiant ML310e HP ProLiant ML310e Gen8 Server Maintenance and Service Guid - Page 35

Disconnect the drive power cable from the 10-pin power supply connector.

Get HP ProLiant ML310e PDF manuals and user guides View all HP ProLiant ML310e manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

b. Disconnect each power cord from the server. 3. Remove the tower bezel (on page 26). 4. Remove the access panel ("Access panel" on page 31). 5. If the drives are to be connected to a storage controller card, remove the air baffle ("Air baffle" on page 32). 6. Remove all installed drives ("Storage drive" on page 28). 7. Disconnect the drive cage cables: a. Disconnect the Mini-SAS cable from the system board or from the storage controller option. b. Disconnect the drive power cable from the 10-pin power supply connector. 8. Remove the drive cage assembly. 9. Do one of the following: For image clarity, the Mini-SAS and power cables attached to the drive cage are not shown in the following figures. Removal and replacement procedures 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
Removal and replacement procedures
35
b.
Disconnect each power cord from the server.
3.
Remove the tower bezel (on page
26
).
4.
Remove the access panel ("
Access panel
" on page
31
).
5.
If the drives are to be connected to a storage controller card, remove the air baffle ("
Air baffle
" on page
32
).
6.
Remove all installed drives ("
Storage drive
" on page
28
).
7.
Disconnect the drive cage cables:
a.
Disconnect the Mini-SAS cable from the system board or from the storage controller option.
b.
Disconnect the drive power cable from the 10-pin power supply connector.
8.
Remove the drive cage assembly.
9.
Do one of the following:
For image clarity, the Mini-SAS and power cables attached to the drive cage are not shown in the
following figures.