HP ProLiant ML310e HP ProLiant ML310e Gen8 Server Maintenance and Service Guid - Page 53

RPS cage

Get HP ProLiant ML310e PDF manuals and user guides View all HP ProLiant ML310e manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

8. Remove the RPS backplane module. To replace the component, reverse the removal procedure. RPS cage To remove the component: 1. Power down the server (on page 27). 2. Remove all power: a. Disconnect each power cord from the power source. b. Disconnect each power cord from the server. 3. Unlock the tower bezel (on page 26). 4. Remove the access panel ("Access panel" on page 31). 5. Remove the air baffle ("Air baffle" on page 32). 6. Disconnect the power supply cables from the system board and the drives. 7. Remove the EMI shield from the lower media bay. 8. Remove the optical drive from the upper media bay ("Optical drive" on page 32). 9. Remove the hot-plug power supplies ("Hot-plug power supply" on page 30). 10. Remove the RPS backplane module ("RPS backplane module" on page 52). Removal and replacement procedures 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
Removal and replacement procedures
53
8.
Remove the RPS backplane module.
To replace the component, reverse the removal procedure.
RPS cage
To remove the component:
1.
Power down the server (on page
27
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Unlock the tower bezel (on page
26
).
4.
Remove the access panel ("
Access panel
" on page
31
).
5.
Remove the air baffle ("
Air baffle
" on page
32
).
6.
Disconnect the power supply cables from the system board and the drives.
7.
Remove the EMI shield from the lower media bay.
8.
Remove the optical drive from the upper media bay ("
Optical drive
" on page
32
).
9.
Remove the hot-plug power supplies ("
Hot-plug power supply
" on page
30
).
10.
Remove the RPS backplane module ("
RPS backplane module
" on page
52
).