HP R1500 HP R1500 G3 UPS User Guide - Page 17
Charging the UPS batteries, Powering up the UPS, Installing the optional UPS Network Module
![]() |
View all HP R1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Charging the UPS batteries Allow the batteries to charge before putting the UPS into service. IMPORTANT: Charge the batteries for at least 24 hours before supplying backup power to devices. The batteries charge to: • 90% of their capacity within 24 hours • 100% of their capacity within 48 hours Powering up the UPS Press and hold the Power On/Standby button (1) until the UPS beeps. The Power On, Load 1 and Load 2 LEDs illuminate, indicating that power is available at the UPS output receptacles. Installing the optional UPS Network Module NOTE: It is not necessary to power down the UPS before installing the UPS Network Module. Installation 17
![](/manual_guide/products/hewlettpackard-rt3000-hp-r1500-g3-ups-user-guide-e569e6f/17.png)
Installation 17
Charging the UPS batteries
Allow the batteries to charge before putting the UPS into service.
IMPORTANT:
Charge the batteries for at least 24 hours before supplying backup power to
devices. The batteries charge to:
•
90% of their capacity within 24 hours
•
100% of their capacity within 48 hours
Powering up the UPS
Press and hold the Power On/Standby button (1) until the UPS beeps. The Power On, Load 1 and Load 2
LEDs illuminate, indicating that power is available at the UPS output receptacles.
Installing the optional UPS Network Module
NOTE:
It is not necessary to power down the UPS before installing the UPS Network Module.