HP Rp5000 Getting Started (3rd Edition) - Page 32
If the AUX LED on, cables are properly
UPC - 808736747592
View all HP Rp5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Getting Started Diagnostic Front Panel LEDs and Audible Codes Activity System does not power on and LEDs are not flashing. cont. Beeps None cont. Possible Cause System unable to power on. cont. Recommended Action OR Press and hold the power button for less than 4 seconds. If the hard drive LED does not turn on green then: 1. Check that the unit is plugged into a working AC outlet. 2. Open hood and check that the power button harness is properly connected to the system board. 3. Check that both power supply cables are properly connected to the system board. 4. Check to see if the AUX LED on the system board is turned on. If it is turned on, then replace the power button harness. 5. If the AUX LED on the system board is not turned on, then replace the power supply. 6. Replace the system board. 28 www.hp.com Getting Started