HP SlateBook 14-p000 HP SlateBook PC Maintenance and Service Guide - Page 27
TouchPad, Remove the TouchPad
View all HP SlateBook 14-p000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Reverse this procedure to install the keyboard/top cover. TouchPad Component TouchPad (includes cable) Spare part number 761221-001 Before replacing the TouchPad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 17). Remove the TouchPad: 1. Turn the keyboard/top cover upside down with the front toward you. 2. Remove the two Phillips PM1.9×2.1 broad head screws (1) that secure the TouchPad to the keyboard/top cover. 3. Press on the tab (2) on the back of the TouchPad to release the ToucPad from the keyboard/ top cover. NOTE: When releasing the TouchPad, make sure the TouchPad cable routes through the opening (3) in the keyboard/top cover. TouchPad 21