HP SlateBook 14-p000 HP SlateBook PC Maintenance and Service Guide - Page 36

Front speakers

Page 36 highlights

Front speakers Component Front speakers (include left and right front speakers and cables) Spare part number 759925-001 Before replacing the front speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 17). 5. Remove the battery (see Battery on page 28). Remove the front speakers: 1. Disconnect the front speaker cable (1) from the system board. 2. Release the front speaker cables from the retention clips (2) built into the base enclosure. 3. Tilt the rear edges of the front speakers (3) up and back to disengage the rear speakers from the clips built into the base enclosure. 4. Remove the front speakers (4) and cables. 30 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

Front speakers
Component
Spare part number
Front speakers (include left and right front speakers and cables)
759925-001
Before replacing the front speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
17
).
5.
Remove the battery (see
Battery
on page
28
).
Remove the front speakers:
1.
Disconnect the front speaker cable
(1)
from the system board.
2.
Release the front speaker cables from the retention clips
(2)
built into the base enclosure.
3.
Tilt the rear edges of the front speakers
(3)
up and back to disengage the rear speakers from the
clips built into the base enclosure.
4.
Remove the front speakers
(4)
and cables.
30
Chapter 4
Removal and replacement procedures