HP SlateBook 14-p000 HP SlateBook PC Maintenance and Service Guide - Page 29

WLAN module

Get HP SlateBook 14-p000 PDF manuals and user guides View all HP SlateBook 14-p000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

3. Remove the power button board (2). Reverse this procedure to install the power button board. WLAN module Component Realtek RTL8723BE 802.11b/g/n 1×1 Wi-Fi + Bluetooth 4.0 Combo Adapter Spare part number 753082-005 Before replacing the WLAN module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 17). Remove the WLAN module: 1. Disconnect the WLAN antenna cable (1) from the terminal on the WLAN module. 2. Remove the Phillips PM2.4×2.8 screw (2) that secures the WLAN module to the system board. (The WLAN module tilts up.) WLAN module 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
3.
Remove the power button board
(2)
.
Reverse this procedure to install the power button board.
WLAN module
Component
Spare part number
Realtek RTL8723BE 802.11b/g/n 1×1 Wi-Fi + Bluetooth 4.0 Combo Adapter
753082-005
Before replacing the WLAN module, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
17
).
Remove the WLAN module:
1.
Disconnect the WLAN antenna cable
(1)
from the terminal on the WLAN module.
2.
Remove the Phillips PM2.4×2.8 screw
(2)
that secures the WLAN module to the system board.
(The WLAN module tilts up.)
WLAN module
23