HP SlateBook 14-p000 HP SlateBook PC Maintenance and Service Guide - Page 37
System board
View all HP SlateBook 14-p000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Reverse this procedure to install the front speakers. System board NOTE: The system board spare part kit is equipped with a T40S processor, a graphics subsystem with UMA memory, and 2.0-GB of system memory. Component Includes 64-GB of eMMC Includes 32-GB of eMMC Includes 16-GB of eMMC Spare part number 759928-001 759927-001 759926-001 Before replacing the system board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 17). 5. Remove the WLAN module (see WLAN module on page 23). 6. Remove the rear speakers (see Rear speakers on page 26). Remove the system board: 1. Disconnect the front speaker cable (1) from the system board. 2. Disconnect the display panel cable (2) from the system board. 3. Release the ZIF connector (3) to which the USB board cable is attached, and then disconnect the USB board cable from the system board. System board 31