HP SlateBook 14-p000 HP SlateBook PC Maintenance and Service Guide - Page 33

Power connector cable, from the system board.

Get HP SlateBook 14-p000 PDF manuals and user guides View all HP SlateBook 14-p000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Power connector cable Component Power connector cable Spare part number 759919-001 Before replacing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 17). Remove the power connector cable: 1. Disconnect the power connector cable (1) from the system board. 2. Release the power connector cable from the retention clip (2) built into the base enclosure. 3. Release the power connector (3) and from the clip built into the base enclosure. 4. Remove the power connector cable. Reverse this procedure to install the power connector cable. Power connector cable 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
Power connector cable
Component
Spare part number
Power connector cable
759919-001
Before replacing the power connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
17
).
Remove the power connector cable:
1.
Disconnect the power connector cable
(1)
from the system board.
2.
Release the power connector cable from the retention clip
(2)
built into the base enclosure.
3.
Release the power connector
(3)
and from the clip built into the base enclosure.
4.
Remove the power connector cable.
Reverse this procedure to install the power connector cable.
Power connector cable
27