HP StorageWorks 2/140 FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 17

HAFM upgrade required for, rmware 08.xx.xx, Default zone is disabled by default

Get HP StorageWorks 2/140 - Director Switch PDF manuals and user guides View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

HAFM upgrade required for firmware 08.xx.xx To upgrade to firmware 08.01.00, you must first upgrade the HAFM software to 07.01.00-9 (minimum) if you are using the Notebook HAFM Server to manage the Director or Edge Switch. The HAFM software is contained on the HP StorageWorks ha-fabric manager documentation and software CD (Part Number 516-000024-820). An upgrade kit to HAFM 07.01.00-9 is also available (Part Number 320908-B22) for owners of a licensed version of HAFM. This HAFM upgrade is also available on the following HP web site: http://h18006.www1.hp.com/storage/saninfrastructure.html. If you are using the 1U rack-mount HAFM Appliance to manage the Director or Edge Switch, the minimum HAFM version required is 07.02.00-9, which is the minimum version installed. This HAFM software is contained on the HP StorageWorks ha-fabric manager documentation and software CD (Part Number 516-000024-720). The previous minimum versions of HAFM allow you to manage Directors or Edge Switches running 08.01.00 firmware. However, to use all the new features and enhancements, you need to upgrade HAFM to 08.08.00, which runs only on the 1U rack-mount HAFM Appliance. HAFM 8.08.00 will be available in early December 2005. As an alternative, you can perform the firmware upgrade directly to the Director or Edge Switch using the switches HAFM Basic. Please contact your local HP technical resource if you need to obtain a new HAFM version or to confirm compatibility with devices in your SAN before upgrading to this firmware. For more information on upgrading software versions, see the HP StorageWorks HA-Fabric Manager user guide. The features of this software version are described in the documents listed in Other documentation. Default zone is disabled by default The default zone on the Director and Edge Switches disabled by default. Zoning must be configured in order for devices connected to the Director or Edge Switch to communicate. Some IP addresses must be avoided If you use HAFM to manage other M-Series Fabric Directors and Edge Switches, do not use IP addresses in the following range: 192.168.0.0 through 192.168.0.255-This subnet is used internally by the HAFM Appliance. Using an IP address in this range causes the Call Home feature to function incorrectly. Zoning limits Table 3 lists the supported zoning limits for the Edge Switches and Directors. Director and Edge Switch release notes 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
HAFM upgrade required for
fi
rmware 08.xx.xx
To upgrade to
fi
rmware 08.01.00, you must
fi
rst upgrade the HAFM software to
07.01.00-9 (minimum) if you are using the Notebook HAFM Server to manage the
Director or Edge Switch. The HAFM software is contained on the
HP StorageWorks
ha-fabric manager documentation and software
CD (Part Number 516-000024-820).
An upgrade kit to HAFM 07.01.00-9 is also available (Part Number 320908-B22) for
owners of a licensed version of HAFM. This HAFM upgrade is also available on the
following HP web site:
h
t
t
p
:
/
/
h
1
8
0
0
6
.
w
w
w
1
.
h
p
.
c
o
m
/
s
t
o
r
a
g
e
/
s
a
n
i
n
f
r
a
s
t
r
u
c
t
u
r
e
.
h
t
m
l
.
If you are using the 1U rack-mount HAFM Appliance to manage the Director or Edge
Switch, the minimum HAFM version required is 07.02.00-9, which is the minimum version
installed. This HAFM software is contained on the
HP StorageWorks ha-fabric manager
documentation and software
CD (Part Number 516-000024-720).
The previous minimum versions of HAFM allow you to manage Directors or Edge Switches
running 08.01.00
fi
rmware. However, to use all the new features and enhancements,
you need to upgrade HAFM to 08.08.00, which runs only on the 1U rack-mount HAFM
Appliance. HAFM 8.08.00 will be available in early December 2005.
As an alternative, you can perform the
fi
rmware upgrade directly to the Director or Edge
Switch using the switches HAFM Basic.
Please contact your local HP technical resource if you need to obtain a new HAFM
version or to con
fi
rm compatibility with devices in your SAN before upgrading to this
fi
rmware.
For more information on upgrading software versions, see the
HP StorageWorks
HA-Fabric Manager user guide.
The features of this software version are described in
the documents listed in
Other documentation
.
Default zone is disabled by default
The default zone on the Director and Edge Switches disabled by default. Zoning must be
con
fi
gured in order for devices connected to the Director or Edge Switch to communicate.
Some IP addresses must be avoided
If you use HAFM to manage other M-Series Fabric Directors and Edge Switches, do not
use IP addresses in the following range:
192.168.0.0 through 192.168.0.255—This subnet is used internally by the HAFM
Appliance. Using an IP address in this range causes the Call Home feature to function
incorrectly.
Zoning limits
Table 3
lists the supported zoning limits for the Edge Switches and Directors.
Director and Edge Switch release notes
15