HP StorageWorks 2/140 FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 3
About this document, Release notes information, Intended audience
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
About this document These release notes contain late-breaking and supplemental information for the Director or Edge Switch products. Be sure to read these release notes before installing a Director or Edge Switch product. This information is available and periodically updated on the following HP web site: http://www.hp.com/country/us/eng/prodserv/storage.html. This section describes the following: • Release notes information • Intended audience • Firmware 08.01.00 • Other documentation • Supported configurations • Cable requirements • Important information • Known issues Release notes information These release notes describe the following: • Port state in HAFM Basic may not be correct under specific conditions • Netscape browser may not allow setting of RADIUS server properties • HSG80 transparent mode not recommended in SCSI-3 mode with HP-UX • Error can occur if multiple UPM cards are hot inserted too quickly • Support for speed Auto-Negotiate • Certain applications do not receive SNMP traps • Possible switch reset after power failure or power-down sequence • Activating very large zone sets may fail when using OSMS and CT_AUTH • Preferred Domain ID may not update automatically when configuring SANtegrity features Intended audience These release notes are intended for customers who purchased Director or Edge Switch products. Director and Edge Switch release notes 1