HP StorageWorks 2/140 FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 18
Using the same, rmware level, Reinstalling feature licenses, CTP controls port lights
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Table 3 Zoning limits Zoning parameter Number of zone members in a zone Number of zones in a zone set Number of unique zone members in a zone set Total number of zone members in a zone set (where a zone member can be in multiple zones) Characters per zoning name Number of unique zone members in HAFM Zoning Library Number of zones in HAFM Zoning Library Number of zone sets in HAFM Zoning Library Number of end ports Number of devices supported (including loop devices) Maximum value 2048 1024 2048 4096 32 2048 1024 64 1024 1024 Using the same firmware level All Directors and Edge Switches in the same fabric should have the same firmware level installed-whether 1Gb/s, 2Gb/s, or 4Gb/s capable-to ensure that this firmware operates correctly. The Edge Switch 2/12 had an interim firmware 05.00.00-12. This firmware cannot be used for any other Edge Switch or Director. This interim version is compatible with the M-Series firmware 05.02.00-13 used for the rest of the M-Series fabric products. Firmware 08.01.00 is common for all M-Series fabric products, including the Edge Switch 2/12. Firmware 06.02.00-22 provides support for second-generation Edge Switch 2/12 and Edge Switch 2/24 switches. This is the minimum M-Series firmware supported on the second-generation Edge Switch 2/12 and Edge Switch 2/24. Reinstalling feature licenses Feature licenses (or keys) must be reinstalled after performing a factory reset on an Edge Switch or Director to regain use of the licensed features (for example, SANtegrity Binding). CTP controls port lights Port lights on the Edge Switches and Directors are controlled by the CTP. Certain activities such as firmware updates, IPLing the CTP, or switching over to the backup CTP (Director) 16