HP StorageWorks 2/140 FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 19

can cause these port lights to extinguish momentarily until control is reasserted by the CTP. The actual Fibre Channel traffic is not affected during these times. Full-fabric capability for Edge Switch 2/12 Unlike other Edge Switch and Director products, a product feature enablement (PFE) key controls Edge Switch 2/12 E_Port-to-E_Port connections. After purchasing and installing the feature key, you can configure for E_Port connections on any of the active ports. The feature key includes distance support. With firmware 06.00.00 and later, the Edge Switch 2/12 ships with five BB_credits allocated to each port. After activation of the Full Fabric feature on a switch, each port has 12 BB_Credits allocated to support up to 12 km links at 2 Gb/s speed. Known issues This section describes the known issues related to the Director 2/64 and Director 2/140. Port state in HAFM Basic may not be correct under certain conditions Port state information may not update correctly in HAFM Basic when an unresponsive node becomes active again. The port may report Invalid Attachment even if it is active and traffic is flowing across the link. Workaround The display of port state can be corrected by blocking and then unblocking the port. Note that this is disruptive to the connected node, and should only be done as part of scheduled maintenance. Netscape browser may not allow setting of RADIUS server properties You may not be able to set RADIUS server properties using the Security > RADIUS Server page using Netscape to access HAFM Basic. Workaround Use another browser such as Microsoft Internet Explorer. Restore configuration for Edge Switch 2/24 does not complete successfully if there are a large number of zones Restore configuration does not complete successfully if the backup switch configuration contains more than 2,047 zones. This should not affect most customers, as this is a large number of zones. Director and Edge Switch release notes 17