HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Fabric Watch Administrator - Page 41
Step 3: Con alarms
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Step 3: Configure alarms Alarms act as a signal or alert that notifies you when a threshold has been crossed. You can configure the following types of notification settings for Fabric Watch: • Triggered A triggered behavior type signals you once, after a threshold has been crossed. Triggered is the default behavior type signal for all class areas. • Continuous A continuous behavior type signals you continuously after a threshold has been crossed. To set an alarm, choose the type of event about which you want to receive notifications: • Changed Triggers an alarm every time the value of what you are monitoring is changed. • Below Triggers an alarm every time the value of what you are monitoring goes below the low boundary. • Above Triggers an alarm every time the value of what you are monitoring goes above the high boundary. • In-Between Triggers an alarm every time the value of what you are monitoring goes in between your low and high threshold boundary. How to calculate values for alarms The following sections show how to change the above alarm for the RXPerformance class. Here, a value of 19 is specified. The value is the sum of the alarm matrix values: in this case EmailAlert-16, SnmpTrap-2, and Errlog-1 (16+2+1=19). To calculate the values to specify in your alarms: 1. Add the numbers beside each state (for the states you want to include). The values for the states are: • Errlog - 1 • SnmpTrap - 2 • PortLogLock - 4 • RapiTrap - 8 • EmailAlert -16 Fabric OS 5.x Fabric Watch administrator guide 41
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-fabric-os-5x-fabric-watch-administrator-guide-aarvj0bte-2005-d76cef5/41.png)