Home » HP Manuals » Storage Devices » HP StorageWorks 2/64 » Manual Viewer

HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Fabric Watch Administrator - Page 65

Resource class

View all HP StorageWorks 2/64 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

Table 24 F/FL-Port class threshold defaults (continued) Area Description Default Threshold Default Alarm Settings Settings Transmit Performance Monitors the transmit rate, by percentage Unit: percentage Time Base: minute Low: 0 High: 100 Buffer: 0 Invalid CRC Count Monitors the number of CRC errors Unit: error(s) Time Base: minute Low: 1 High: 5 Buffer: 0 Invalid Transmission Word Monitors the number of invalid words transmitted Unit: error(s) Time Base: minute Low: 1 High: 5 Buffer: 0 Link Failure Count Monitors the number of link failures Unit: error(s) Time Base: minute Low: 1 High: 5 Buffer: 0 Loss of Signal Count Monitors the number of signal loss errors Unit: error(s) Time Base: minute Low: 1 High: 5 Buffer: 0 Primitive Sequence Protocol Error Monitors the number of primitive sequence errors Unit: error(s) Time Base: minute Low: 1 High: 5 Buffer: 0 Changed: 0 Below: 0 Above: 0 In-Between: 0 Changed: 0 Below: 0 Above: 0 In-Between: 0 Changed: 0 Below: 0 Above: 0 In-Between: 0 Changed: 0 Below: 0 Above: 0 In-Between: 0 Changed: 0 Below: 0 Above: 0 In-Between: 0 Changed: 0 Below: 0 Above: 0 In-Between: 0 Threshold State Informative Informative Informative Informative Informative Informative Informative Out_of_range In_range Informative Informative Out_of_range In_range Informative Informative Out_of_range In_range Informative Informative Out_of_range In_range Informative Informative Out_of_range In_range Resource class Table 25 provides default settings for areas in the Resource class. Table 25 Resource class threshold defaults Area Flash Description Monitors the percentage of compact flash used Default threshold settings Unit: percentage Time base: none Low: 0 High: 85 Buffer: 0 Default alarm settings Changed: 0 Below: 0 Above: 1 In-Between: 0 Threshold state Informative Informative Out_of_range In_range Fabric OS 5.x Fabric Watch administrator guide 65

Section	Page
Contents	3
Intended audience	7
Related documentation	7
Document conventions and symbols	8
Table 1 Document conventions	8
HP technical support	9
HP-authorized reseller	9
Helpful web sites	9
An introduction to Fabric Watch	11
Fabric Watch overview	11
Introduction to fabric health	12
Fabric Watch concepts	13
Fabric watch components	13
Classes	13
Table 2 Fabric Watch classes	13
Areas	14
Environment class areas	14
Table 3 Environment class areas	14
Fabric class areas	15
Table 4 Fabric class sreas	15
FRU class areas	15
Table 5 FRU class areas	15
Performance monitor class areas	16
Table 6 Performance monitor class areas	16
Port class areas	16
Table 7 Port class areas	16
Resource class area	17
Table 8 Resource class area	17
Security class areas	17
Table 9 Security class areas	17
SFP class areas	18
Table 10 SFP class areas	18
Elements	19
Configuring events	19
Event behavior types	19
Continuous event behavior	19
Triggered event behavior	20
Data values	20
Threshold values	20
High and low thresholds	20
Buffer values	20
Figure 1 Threshold monitoring	21
Figure 2 A buffered data region	21
Time bases	21
Setting time base to none	21
Figure 3 Time base set to none	21
Specifying a time base	22
Figure 4 Event trigger	22
Figure 5 Example without an event	23
Event settings	23
Above event triggers	23
Figure 6 Above event trigger with buffer zone	23
Below event trigger	24
Changed event trigger	24
Figure 7 Changed threshold	24
In-Between triggers	24
Figure 8 In-Between trigger	24
Port persistence	25
Notification methods	25
Switch event (error) log entry	25
SNMP trap	25
RAPITrap	26
Port log lock	26
Email alert	26
Assigning notification methods	26
Table 11 Numerical values of notification methods	26
Switch policies	27
Interpreting event messages	27
Activating and accessing Fabric Watch	29
Activating Fabric Watch	29
Activating with telnet	29
Activating with Advanced Web Tools	29
Accessing Fabric Watch	29
Telnet	30
Advanced Web Tools	30
SNMP-Based enterprise managers	30
Configuration file	32
Configuring Fabric Watch	33
Configuring Fabric Watch thresholds	33
Step 1: Select the class and area to configure	33
Table 12 Element listing information - RXPerformance area menu	34
Step 2: Configure thresholds	35
1. refresh	35
2. disable a threshold	35
Figure 9 Disabling a threshold	36
3. enable a threshold	36
4. advanced configuration	37
Table 13 Element listing information - Advanced Configuration Menu	38
Table 14 Element listing information - threshold boundary menu	40
Step 3: Configure alarms	41
How to calculate values for alarms	41
Figure 10 Changing the threshold alarm level	43
Figure 11 Applying threshold alarm changes	43
Table 15 Advanced configuration options	44
Step 4: Disable and enable thresholds by port (optional)	45
Configuring notifications	46
Configuring alarm notifications	46
Configuring SNMP notifications	46
Configuring port log lock actions	46
Configuring email notifications	47
Figure 12 fwMailcfg Menu	47
1: Show Mail configuration information	47
Figure 13 Config show menu	47
Configuring switch status policy	49
Step 1: Plan and define your switch status policy	49
Table 16 Switch status policy monitor health factors	49
Step 2: Implement your switch status policy	50
Step 3: View your switch status policy	50
Configuring FRUs	50
Figure 14 fwFruCfg configuration	51
Configuring Fabric Watch using Web Tools	51
Configuring Fabric Watch using SNMP	51
Figure 15 Configuring Fabric Watch using SNMP	52
Figure 16 Enabling Fabric Watch Traps in SNMP	52
Figure 17 Configuring SNMP management host IP address	53
Figure 18 Example OID tree	54
Figure 19 Example swFwName screen	54
Default threshold values	57
Environment class	57
Table 17 Environment class threshold defaults	58
Fabric class	60
Table 18 Fabric Class threshold defaults	60
Performance monitor class	61
Table 19 AL_PA performance monitor class threshold defaults	61
Table 20 Customer-Defined performance monitor class threshold defaults	61
Table 21 End-to-End performance monitor class threshold defaults	62
Port class	62
Table 22 Port Class threshold defaults	62
Table 23 E-Port class threshold defaults	63
Table 24 F/FL-Port class threshold defaults	64
Resource class	65
Table 25 Resource class threshold defaults	65
Security class	66
Table 26 Security class threshold defaults	66
SFP class	68
Table 27 SFP Class Threshold Defaults	68
Basic Fabric Watch configuration guidelines	69
Using Fabric Watch with configuration files	71
Configuration files	71

Match case Limit results 1 per page

Fabric OS 5.x Fabric Watch administrator guide

Resource class

Table 25

provides default settings for areas in the Resource class.

Transmit

Performance

Monitors the

transmit rate, by

percentage

Unit: percentage

Time Base: minute

Low: 0

High: 100

Buffer: 0

Changed: 0

Below: 0

Above: 0

In-Between: 0

Informative

Invalid CRC

Count

Monitors the

number of CRC

errors

Unit: error(s)

Time Base: minute

Low: 1

High: 5

Buffer: 0

Changed: 0

Below: 0

Above: 0

In-Between: 0

Informative

Out_of_range

In_range

Invalid

Transmission

Word

Monitors the

number of

invalid words

transmitted

Unit: error(s)

Time Base: minute

Low: 1

High: 5

Buffer: 0

Changed: 0

Below: 0

Above: 0

In-Between: 0

Informative

Out_of_range

In_range

Link Failure Count

Monitors the

number of link

failures

Unit: error(s)

Time Base: minute

Low: 1

High: 5

Buffer: 0

Changed: 0

Below: 0

Above: 0

In-Between: 0

Informative

Out_of_range

In_range

Loss of Signal

Count

Monitors the

number of signal

loss errors

Unit: error(s)

Time Base: minute

Low: 1

High: 5

Buffer: 0

Changed: 0

Below: 0

Above: 0

In-Between: 0

Informative

Out_of_range

In_range

Primitive

Sequence

Protocol Error

Monitors the

number of

primitive

sequence errors

Unit: error(s)

Time Base: minute

Low: 1

High: 5

Buffer: 0

Changed: 0

Below: 0

Above: 0

In-Between: 0

Informative

Out_of_range

In_range

Table 24

F/FL-Port class threshold defaults (continued)

Area

Description

Default Threshold

Settings

Default Alarm

Settings

Threshold

State

Table 25

Resource class threshold defaults

Area

Description

Default threshold

settings

Default alarm

settings

Threshold

state

Flash

Monitors the

percentage of

compact flash

used

Unit: percentage

Time base: none

Low: 0

High: 85

Buffer: 0

Changed: 0

Below: 0

Above: 1

In-Between: 0

Informative

Out_of_range

In_range