HP StorageWorks 2000sa HP StorageWorks P2000 G3 MSA System Event Description R - Page 27

261 Informational In-band SES commands have been disabled. Recommended actions • No action required. 262 Informational In-band SES commands have been enabled. Recommended actions • No action required. 263 Warning The indicated disk spare is missing. Either it was removed or it is not responding. Recommended actions • Replace the indicated disk. 264 Informational The link speed of the port bypass circuit and interconnect mode has been set to the default. Recommended actions • No action required. 265 Informational Port bypass circuits currently use the service port, which may limit the link speed or interconnect mode support. Recommended actions • Perform a system-level shutdown and restart. Note that this will cause all data to be unavailable for about 1 minute. 266 Informational A volume-copy operation for the indicated master volume has been aborted. Recommended actions • No action required. 267 Error While cleaning up resources in metadata at the end of a background rollback process, the firmware found at least one error and suspended the process for the indicated volume. Recommended actions • Make sure that disks and vdisks associated with the rollback do not have problems (health OK, status FTOL or UP) and then retry the rollback. 268 Informational A background volume-copy operation for the indicated master volume has completed. Recommended actions • No action required. 269 Informational A partner firmware update operation has started. This operation is used to copy firmware from one controller to the other to bring both controllers up to the same version of firmware. Recommended actions • No action required. HP StorageWorks P2000 G3 MSA System Event Descriptions Reference Guide 27