HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch command line - Page 203
The following is an example of the, command, config, show config port
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Examples The following is an example of the set config port command: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> config edit 8/20q FC Switch (admin-config) #> set config port 1 A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Configuring Port Number: 1 AdminState (1=Online, 2=Offline, 3=Diagnostics, 4=Down) LinkSpeed (1=1Gb/s, 2=2Gb/s, 4=4Gb/s, 8=8Gb/s, A=Auto) PortType (GL, G, F, FL, TR ) SymPortName (string, max=32 chars) ALFairness (True / False) DeviceScanEnable (True / False) ForceOfflineRSCN (True / False) ARB_FF (True / False) InteropCredit (decimal value, 0-255) FANEnable (True / False) AutoPerfTuning (True / False) MSEnable (True / False) NoClose (True / False) IOStreamGuard (Enable / Disable / Auto) PDISCPingEnable (True / False) [Online] [Auto ] [GL ] [Port1 ] [False ] [True ] [False ] [False ] [0 ] [True ] [True ] [True ] [False ] [Auto ] [True ] Finished configuring attributes. This configuration must be saved (see config save command) and activated (see config activate command) before it can take effect. To discard this configuration use the config cancel command. See also config, page 142 show config port, page 241 8/20q Fibre Channel Switch command line interface guide 203