HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch command line - Page 299
StopOnError, LoopForever, Parameter, Description, Examples, See also
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 299 highlights
Table 73 Switch test parameters (continued) Parameter Description StopOnError Stops the test when an error occurs (True). Otherwise, the test continues to completion. LoopForever Restarts the test after completion and continues until you cancel it (True). Otherwise, the test ends normally after completion. Examples The following example performs an offline internal test on a switch: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #>set switch state diagnostics 8/20q FC Switch (admin) #> test switch offline internal A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the default value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. LoopCount FrameSize DataPattern StopOnError LoopForever (decimal value, 1-4294967295) [100 ] (decimal value, 40-2148) [256 ] (32-bit hex value or 'Default') [Default] (True / False) [True ] (True / False) [False ] Do you want to start the test? (y/n) [n] y See also test cancel, page 293 test status, page 296 test switch, page 298 8/20q Fibre Channel Switch command line interface guide 299