HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch command line - Page 25
Network configuration, Displaying the network configuration
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3 Network configuration Network configuration consists of the IP parameters that identify the switch in the network and provide for IP security. This section describes the following network configuration tasks: • Displaying the network configuration, page 25 • Configuring the Ethernet port, page 26 • Verifying a switch in the network, page 28 • Managing IP security, page 29 Displaying the network configuration The show fabric command displays IP addresses (Enet IP Addr) for all switches in the fabric, as shown in the following example. 8/20q FC Switch #> show fabric Domain *133(0x85) WWN 10:00:00:c0:dd:0d:53:91 SymbolicName 8/20q FC Switch HostName EthIPv4Address 10.20.116.133 EthIPv6Address * indicates principal switch The show setup system command displays the entire switch network configuration, which includes the following: • IP configurations (versions 4 and 6) • DNS server configuration To display specific information, add the corresponding keyword. For example, to display IPv6 configuration information, enter the show setup system ipv6 command: 8/20q FC Switch #> show setup system ipv6 System Information EthIPv6NetworkEnable EthIPv6NetworkDiscovery EthIPv6NetworkAddress EthIPv6GatewayAddress False Static 2001::1/64 fe80::1 8/20q Fibre Channel Switch command line interface guide 25