HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch command line - Page 47
To con the switch services, enter the, command in an Admin session,
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
To configure the switch services, enter the set setup services command in an Admin session, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> set setup services A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. PLEASE NOTE Further configuration may be required after enabling a service. * If services are disabled, the connection to the switch may be lost. * When enabling SSL, please verify that the date/time settings on this switch and the workstation from where the SSL connection will be started match, and then a new certificate may need to be created to ensure a secure connection to this switch. TelnetEnabled SSHEnabled GUIMgmtEnabled SSLEnabled EmbeddedGUIEnabled SNMPEnabled NTPEnabled CIMEnabled FTPEnabled MgmtServerEnabled CallHomeEnabled (True / False) (True / False) (True / False) (True / False) (True / False) (True / False) (True / False) (True / False) (True / False) (True / False) (True / False) [True ] [False] [True ] [False] [True ] [True ] [False] [False] [True ] [True ] [True ] Do you want to save and activate this services setup? (y/n): [n] 8/20q Fibre Channel Switch command line interface guide 47