HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch command line - Page 79
Zoning database limits, Configuring the zoning database
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Zoning database limits To display a summary of the objects in the zoning database and their maximum limits, enter the zoning limits command, as shown in the following example: 8/20q FC Switch #> zoning limits Configured (saved in NVRAM) Zoning Information Zoning Attribute Maximum Current [Zoning Name] MaxZoneSets 256 6 MaxZones 2000 17 MaxAliases 2500 1 MaxTotalMembers 10000 166 MaxZonesInZoneSets 2000 19 MaxMembersPerZone 2000 10 D_1_JBOD_1 23 D_1_Photons 9 D_2_JBOD1 16 D_2_NewJBOD_2 5 E1JBOD1 5 E2JBOD2 3 LinkResetZone 3 LinkResetZone2 8 NewJBOD1 8 NewJBOD2 24 Q_1Photon1 8 Q_1_NewJBOD1 13 Q_1_Photon_1 21 Q_2_NewJBOD2 3 ZoneAlias 3 ZoneDomainPort 4 ZoneFCAddr MaxMembersPerAlias 2000 2 AliasInAZone ActiveZones 19 ActiveZoneMembers 160 To display abbreviated limits information, enter the zoning limits brief command. Configuring the zoning database You can configure how the zoning database is applied to the switch and exchanged with the fabric by using the zoning configuration parameters. The following zoning configuration parameters are available through the set config zoning command. For more information about the zoning configuration parameters, see Table 39. • MergeAutoSave-Enables or disables the automatic saving of a new active zone set to the switch non-volatile zoning database. • DefaultZone-Allows or denies communication among ports/devices that are not defined in the active zone set. • DiscardInactive-Enables or disables the discarding of all zone sets except the active zone set. 8/20q Fibre Channel Switch command line interface guide 79