HP StorageWorks 8/24 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 617
SEC-1311, Severity, Message, Probable Cause, Recommended, Action, passwdCfg, setDefault, secModeEnable
View all HP StorageWorks 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 617 highlights
90 SEC-1311 Severity INFO SEC-1311 Message , [SEC-1311], ,, ERROR, , Security mode cannot be enabled because one or more of the password policies is not set to default value. Probable Cause Indicates the security enable failed on the fabric because one or more switches in the fabric have password policies that are not set to the default value. Recommended Action Verify the security event was planned. If the security event was planned, run the passwdCfg --setDefault command on each switch in the fabric to set the password policies to the default value. Then verify with passwdCfg --show that password policies are set to the default values on all switches and retry the secModeEnable command. Severity ERROR SEC-1312 Message , [SEC-1312], ,, INFO, , . Probable Cause Indicates the passwdCfg parameters changed. Recommended Action Verify the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. Severity INFO SEC-1313 Message , [SEC-1313], ,, INFO, , The passwdcfg parameters were set to default values. Probable Cause Indicates the passwdCfg parameters were set to default values. Recommended Action Verify the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. Severity INFO SEC-1314 Message , [SEC-1314], ,, ERROR, , Reading IP address from EM failed. Fabric OS Message Reference 547 53-1001338-01