HP StorageWorks 8/8 Brocade Converged Enhanced Ethernet Command Reference v6.3 - Page 173
command to return to the default setting.This command is only for MSTP.
![]() |
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
spanning-tree hello-time 9 spanning-tree hello-time Configures the hello-time in seconds on the interface. Synopsis spanning-tree hello-time seconds no spanning-tree hello-time Operands seconds Sets the interval between the hello Bridge Protocol Data Units (BPDUs) sent by the root switch configuration messages. The range of valid values 1-10. Defaults The default is 2 seconds. Command Interface configuration mode Modes Description Use this command to set the interval time between the BPDUs sent by the root switch. Use the no spanning-tree hello-time command to return to the default setting.This command is only for MSTP. Usage Changing the hello-time affects all spanning-tree instances. The max-age setting must be greater Guidelines than the hello-time setting. Examples To set the hello time to 5 seconds: switch(conf-if-te-0/1)#spanning-tree hello-time 5 See Also forward-delay, max-age, show spanning-tree Converged Enhanced Ethernet Command Reference 155 53-1001347-01
![](/manual_guide/products/hewlettpackard-am866a-brocade-converged-enhanced-ethernet-command-reference-v630-53100134701-2009-a26c65e/173.png)