HP StorageWorks 8/8 Brocade Converged Enhanced Ethernet Command Reference v6.3 - Page 95
hello, Synopsis, no hello, Operands, Defaults, Command, Modes, Description, Usage, Guidelines
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
hello 5 hello Sets the Hello transmit interval. Synopsis hello seconds no hello Operands seconds Sets the Hello transmit interval. The range of valid values is 4-180 seconds. Defaults The default is 30 seconds. Command Protocol LLDP configuration mode Modes Description Use this command to set the interval between LLDP hello messages. Use the no hello command to return to the default setting. Usage There are no usage guidelines for this command. Guidelines Examples To set the time interval to 10 seconds between the transmissions: switch#configure terminal switch (config) #protocol lldp switch(conf-lldp)#hello 10 See Also none Converged Enhanced Ethernet Command Reference 77 53-1001347-01
Converged Enhanced Ethernet Command Reference
77
53-1001347-01
hello
5
hello
Sets the Hello transmit interval.
Synopsis
hello
seconds
no hello
Operands
seconds
Sets the Hello transmit interval. The range of valid values is 4-180 seconds.
Defaults
The default is 30 seconds.
Command
Modes
Protocol LLDP configuration mode
Description
Use this command to set the interval between LLDP hello messages. Use the
no hello
command to
return to the default setting.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To set the time interval to 10 seconds between the transmissions:
switch#
configure terminal
switch (config) #
protocol lldp
switch(conf-lldp)#
hello 10
See Also
none