HP StorageWorks 8/8 Brocade Converged Enhanced Ethernet Command Reference v6.3 - Page 183
RMON Commands
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Chapter RMON Commands 10 rmon alarm Sets alarm conditions. Synopsis rmon alarm index snmp_oid interval seconds {absolute | delta} rising-threshold value event number [falling-threshold value event number [owner name] | owner name] no rmon alarm index [snmp_oid interval seconds {absolute | delta} rising-threshold value event number [falling-threshold value event number [owner name] | owner name]] Operands index Specifies the alarm index. The range of valid values is 1-65535. snmp_oid Specifies the MIB object to monitor. The variable must be in the SNMP OID format, for example, 1.3.6.1.2.1.16.1.1.1.5.65535. The object type must be a counter32. interval seconds Specifies the alarm sample interval in seconds. The range of valid values is 1-2147483648. absolute Sets the sample type as absolute. delta Sets the sample type as delta. rising-threshold value Specifies the alarm rising threshold. The range of valid values is 0-4294967295. event number Specifies the event for the rising alarm. The range of valid values is 1-65535. falling-threshold value Specifies the alarm falling threshold. The range of valid values is 0-4294967295. event number Specifies the event for the rising alarm. The range of valid values is 1-65535. owner name Specifies the identity of the owner. The maximum number of characters is 32. Defaults There are no alarms configured. Command Global configuration mode Modes Description Use this command to set alarm conditions. Use the no rmon alarm command to disable the alarm conditions. Usage There are no usage guidelines for this command. Guidelines Examples To set alarm conditions: Converged Enhanced Ethernet Command Reference 165 53-1001347-01