HP StorageWorks 8/8 Brocade Converged Enhanced Ethernet Command Reference v6.3 - Page 194
qos cos, If the interface is QoS trusted
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
11 qos cos qos cos Specifies the interface Class of Service (CoS) value. Synopsis qos cos value no qos cos Operands value Specifies the CoS value. The range of valid values is 0-7. Defaults The default CoS value is 0 (zero). Command Interface configuration mode Modes Description Use this command to specify the interface Default CoS value. When Interface ingress QoS Trust is in the untrusted mode, then the Interface Default CoS value is applied to all ingress traffic for user priority mapping. When the interface ingress QoS Trust is in the CoS mode, then the Interface Default CoS value is applied to all non-priority tagged ingress traffic for user priority mapping. Use the no qos cos command to return the CoS value to the default. Usage If the interface is QoS trusted, the CoS value of the interface is used to assign a CoS value to all Guidelines untagged packets entering the interface. Examples To set the interface CoS value to 2: switch(conf-if-te-0/2)#qos cos 2 To return the interface CoS value to the default: switch(conf-if-te-0/2)#no qos cos See Also show qos, qos map, qos trust 176 Converged Enhanced Ethernet Command Reference 53-1001347-01