HP StorageWorks 8/8 Brocade Converged Enhanced Ethernet Command Reference v6.3 - Page 63
Specifies the interface is a port-channel. The range of valid values is 1-63.
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
show interface 3 show interface Displays the configuration and status of an interface. Synopsis show interface [tengigabitethernet slot/port | port-channel number| switchport] Operands tengigabitethernet Specifies a valid 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. port-channel number Specifies the interface is a port-channel. The range of valid values is 1-63. switchport Specifies the Layer 2 interface. Defaults There are no default configurations for this command. Command EXEC mode Modes Description Use this command to show the running system status and configuration for a specified interface. Usage There are no usage guidelines for this command. Guidelines Examples To display information for a 10 Gbps Ethernet interface: switch#show interface tengigabitethernet 0/1 Interface name Switchport mode Ingress filter Acceptable frame types Default Vlan Active Vlans Inactive Vlans : TenGigabitEthernet 0/7 : access : enable : all : 1 : 1 : - Interface name Switchport mode Ingress filter Acceptable frame types Default Vlan Active Vlans Inactive Vlans : TenGigabitEthernet 0/1 : access : enable : all : 5 : 5 : - See Also show interface vlan Converged Enhanced Ethernet Command Reference 45 53-1001347-01