HP StorageWorks 8/8 Brocade Converged Enhanced Ethernet Command Reference v6.3 - Page 176
command for MSTP and RSTP., standard forward time. Use
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
9 spanning-tree portfast spanning-tree portfast Enables the Port Fast feature on an interface to allow the interface to quickly transition to forwarding state. Synopsis spanning-tree portfast [bpdu-filter | bpdu-guard] Operands bpdu-filter bpdu-guard Sets the Port Fast BPDU filter for the port. Guards the port against the reception of BPDUs. Defaults Port Fast is disabled. Command Interface configuration mode Modes Description Use this command to enable the Port Fast feature. This command is is the only for the STP. Port Fast immediately puts the interface into the forwarding state without having to wait for the standard forward time. Use the spanning-tree edgeport command for MSTP and RSTP. Usage If you enable portfast bpdu-guard on an interface and the interface receives a BPDU, the software Guidelines disables the interface and puts the interface in the ERR_DISABLE state. Examples To enable a port to quickly transition to the forwarding state: switch(conf-if-te-0/1)#spanning-tree portfast To set the Port Fast BPDU filter for the port: switch(conf-if-te-0/1)#spanning-tree portfast bpdu-filter To guard the port against the reception of BPDUs: switch(conf-if-te-0/1)#spanning-tree portfast bpdu-guard See Also spanning-tree portfast bpdu-guard, spanning-tree autoedge 158 Converged Enhanced Ethernet Command Reference 53-1001347-01