HP StorageWorks 8/8 Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 296
FW-1135, FW-1136, FW-1137, FW-1138
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 296 highlights
35 FW-1135 FW-1135 Message , [FW-1135], ,, INFO, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of fabric logins has risen above the high boundary. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric login or FLOGI. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1136 Message , [FW-1136], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of fabric logins has changed from a value outside of the acceptable range to a value within the acceptable range. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric login or FLOGI. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1137 Message , [FW-1137], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of small form-factor pluggable (SFP) state changes has changed. SFP state changes occur when the SFP is inserted or removed. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1138 Message , [FW-1138], ,, INFO, , , is below low boundary(High=, Low=). Current value is . 238 Fabric OS Message Reference 53-1001157-01