HP StorageWorks 8/8 Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 491
SEC-1110, SEC-1111, SEC-1112
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 491 highlights
75 SEC-1110 Probable Cause Indicates that a version reset operation failed either because the switch could not get all the required resources to perform the operation or because it failed to send the message to all switches in the fabric. Recommended Action Verify that the security event was planned. If the security event was planned, run the secFabricShow command to verify that all switches in the fabric are in the ready state. When all switches are in the ready state, retry the operation. Severity ERROR SEC-1110 Message , [SEC-1110], ,, ERROR, , FCS list must be the first entry in the [Defined Security policies] section. Fail to download defined database. Probable Cause Indicates that a security policy download is attempted with a defined policy that does not have the fabric configuration server (FCS) policy as the first policy. The FCS policy is required to be the first policy in the defined security database. Recommended Download a correct configuration with the fabric configuration server (FCS) policy as the first policy Action in the defined security database. Severity ERROR SEC-1111 Message , [SEC-1111], ,, ERROR, , New defined FCS list must have at least one member in common with current active FCS list. Fail to download defined database. Probable Cause Indicates the defined and active fabric configuration server (FCS) policy list failed to have at least one member in common. Recommended A new FCS policy list must have at least one member in common with the previous FCS policy. Action Severity ERROR SEC-1112 Message Probable Cause , [SEC-1112], ,, ERROR, , FCS list must be the first entry in the Active Security policies, and the same as the current active FCS list in the switch. Indicates that either a security policy download is attempted with an active policy that does not have the fabric configurations server (FCS) policy as the first policy or the FCS policy is not same as the current FCS policy on the switch. Fabric OS Message Reference 433 53-1001157-01