HP StorageWorks 8/8 Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 579
UCST-1003, Message, Probable Cause, Recommended, Action, Severity, switchDisable, uRouteShow
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 579 highlights
Chapter UCST System Messages 88 UCST-1003 Message , [UCST-1003], ,, INFO, , Duplicate Path to Domain , Output Port = , PDB pointer = 0x Probable Cause Indicates that duplicate paths were reported to the specified domain from the specified output port. The path database (PDB) pointer is the address of the path database and provides debugging information. Recommended No action is required. Action Severity INFO UCST-1007 Message , [UCST-1007], , FFDC, CRITICAL, , Inconsistent route detected: Port = , should be Probable Cause Indicates the switch detected an inconsistency in the routing database between the routing protocol and the hardware configuration. The first port number displayed is what the hardware has configured and the second port number displayed is what the protocol is using. Recommended Run the switchDisable command and then the switchEnable command to reset the routing Action database. Run the uRouteShow command to display the new routing tables. Severity CRITICAL UCST-1020 Message , [UCST-1020], ,, WARNING, , Static route (input-area: , domain: output-area: ) has been ignored due to platform limitation. Probable Cause Indicates the configured static route cannot be applied to the routing database due to a platform limitation. Recommended No action is required. Action Severity WARNING Fabric OS Message Reference 521 53-1001157-01