HP StorageWorks Modular Smart Array 1000 Installation and Reference Guide for - Page 14

Upgrading HP MPIO MSA DSM on cluster configurations To upgrade HP MPIO MSA DSM from a previous version on each member of a cluster configuration, complete the steps below: NOTE: In a cluster configuration, HP MPIO MSA DSM must be upgraded on one node at a time for all the nodes in the cluster. 1. Complete the pre-installation checklist (Table 2) and the pre-installation procedure. 2. Using Cluster Administrator: a. Move all cluster resources owned by the current node to another node in the cluster. b. Pause the current cluster node. c. Disable failback for all groups containing resources managed by the current node. 3. Upgrade HP MPIO MSA DSM on the current node by following step 2-6 from the procedure Upgrading HP MPIO MSA DSM on stand-alone systems. 4. Using Cluster Administrator, resume the current cluster node. NOTE: Repeat steps 2-4 for all nodes in the cluster. 5. Using Cluster Administrator: a. Restore failback for all groups containing resources as needed. b. Redistribute cluster resources as desired. Migrating from Windows Server 2003 to Windows Server 2008 with HP MPIO MSA DSM To migrate from Windows Server 2003 to Windows Server 2008 with HP MPIO MSA DSM, complete the steps below: 1. Back up all user data. 2. Install or Upgrade to HP MPIO MSA DSM 3.00.00, see Chapter 1. 3. Upgrade to Windows Server 2008. 4. Double-click the Batch file (depending on your operating system): • For Windows server 2008 x86: \x86\Win2k8Upgrade.bat • For Windows Server 2008 IA64: