HP StorageWorks Modular Smart Array 1000 Installation and Reference Guide for - Page 38
Managing multipath disk devices
View all HP StorageWorks Modular Smart Array 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Figure 3 MPIO Properties page with DSM Install tab enabled NOTE: If the vendor-supplied DSM and MS DSM exist on the same system, the vendor-supplied DSM is always given priority. Managing multipath disk devices Microsoft provides a generic user interface to manage the disk devices that are controlled by MPIO. This interface, which can be accessed through the Multi-Path Disk Device Properties page, under the MPIO tab, enables you to perform basic disk and path management. Figure 4 shows the Multi-Path Disk Device Properties page. HP MPIO MSA DSM supports the management infrastructure of the MPIO tab for features that are applicable to the HP DSM. To manage the Multi-Path Disk Device through this interface, complete the following steps: 1. Go to Device Manager and select the MPIO managed device identified by Multi-Path Disk device. 2. Right-click and select Properties. The Multi-Path Disk Device Properties page displays. 38 Managing MPIO devices using Microsoft-provided interfaces on Windows Server 2008