HP StorageWorks Modular Smart Array 1000 Installation and Reference Guide for - Page 36
Discover Multi-paths
![]() |
View all HP StorageWorks Modular Smart Array 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Figure 1 MPIO Properties page with MPIO-ed Devices tab enabled To manually add support for new devices, complete the following steps: 1. Click Add in the MPIO Properties page. The Add MPIO Support page displays. 2. Enter the Vendor ID and Product ID for the new devices. All devices with this Device Hardware ID are handled by a DSM (either a vendor-supplied DSM or MS DSM). To manually disable support for a device, select a Device Hardware ID and click Remove. Discover Multi-paths In the MPIO Properties page, click the Discover Multi-Paths tab. This tab displays the Device Hardware IDs of the devices that support multipathing, which are currently not managed but supported by MPIO. Figure 2 shows the MPIO Properties page with the Discover Multi-Paths tab enabled. 36 Managing MPIO devices using Microsoft-provided interfaces on Windows Server 2008
![](/manual_guide/products/hewlettpackard-storageworks-modular-smart-array-1000-installation-reference-guide-hp-mpio-featured-dsm-msa10001500-activeactive-disk-arrays-30000-aarw8adte-2008-fe4e03d/36.png)