HP StorageWorks TL895 Adding the TL895 to the Enterprise Backup Solution - Page 26
Upgrading from the DLT 15 Cartridge Library Model 35/70 to the TL895
![]() |
View all HP StorageWorks TL895 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
26 Adding TL895 Tape Drives to the Enterprise Backup Solution Upgrading from the DLT 15 Cartridge Library Model 35/70 to the TL895 Current Enterprise Backup Solution configurations support the DLT 15 Cartridge Library Model 35/70 or the TL895 Tape Library, not both simultaneously. This section assists with the removal of a DLT 15 Cartridge Library Model 35/70 prior to installing a TL895 Tape Library to the EBS. It also provides information on compatibility with previous releases of the TL895. WARNING: Before making any changes, make sure power is off to the DLT 15 Cartridge Library Model 35/70 and the power cord is removed. Also turn power off to the Fibre Channel Tape Controller (FCTC). Removing a Compaq DLT 15 Cartridge Library Model 35/70 from the EBS 1. Turn off power and remove the power cord from the DLT 15 Cartridge Library Model 35/70. Turn off the FCTC power. 2. To remove the DLT 15 Cartridge Library Model 35/70 from the EBS: If using a new SCSI cable, unplug the SCSI cable from the FCTC. If reusing the existing SCSI cable, unplug the SCSI cable from the DLT 15 Cartridge Library Model 35/70. NOTE: A SCSI cable and differential terminator must be used. 3. Refer to the Quick Setup Guide called Connecting the Compaq StorageWorks TL895 Tape Library to the Enterprise Backup Solution (Part Number 330558-001) to connect a TL895 Tape Library to the EBS. 4. Reboot the primary server to recognize the new device. 5. Consult backup application documentation to configure the new library to the EBS.
![](/manual_guide/products/hewlettpackard-storageworks-tl895-adding-tl895-enterprise-backup-solution-c62caf9/26.png)