HP StorageWorks TL895 Adding the TL895 to the Enterprise Backup Solution - Page 70
Program Displays, Each Fibre Channel Array and Fibre Channel Tape Controller is shown as
![]() |
View all HP StorageWorks TL895 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
70 Adding TL895 Tape Drives to the Compaq Enterprise Backup Solution Program Displays The utility's main display is shown below. It displays each FC-AL from the perspective of the server. All Fibre Host Controllers in the server are shown with a slot number and indicate a PCI (/P) or EISA (/E) NOTE: The Enterprise Backup Solution only supports PCI Host Bus Adapters to ensure adequate performance. Each Fibre Channel Array and Fibre Channel Tape Controller is shown as a branch of the Fibre Host Controller that it is connected to. The Arbitrated Loop Physical Address (ALPA) is shown for each Fibre Channel Controller. Figure 6-14. The Fibre Channel Fault Isolation Utility's Main Display
![](/manual_guide/products/hewlettpackard-storageworks-tl895-adding-tl895-enterprise-backup-solution-c62caf9/70.png)
70
Adding TL895 Tape Drives to the Compaq Enterprise Backup Solution
Program Displays
The utility's main display is shown below. It displays each FC-AL from the
perspective of the server. All Fibre Host Controllers in the server are shown
with a slot number and indicate a PCI (/P) or EISA (/E)
NOTE:
The Enterprise Backup Solution only supports PCI Host Bus Adapters to
ensure adequate performance.
Each Fibre Channel Array and Fibre Channel Tape Controller is shown as a
branch of the Fibre Host Controller that it is connected to. The Arbitrated
Loop Physical Address (ALPA) is shown for each Fibre Channel Controller.
Figure 6-14.
The Fibre Channel Fault Isolation Utility’s Main Display