HP StorageWorks XP12000 HP StorageWorks XP12000 Disk Array Owner's Guide (AE00 - Page 32
Operating specifications, Temperature, Humidity, Mechanical vibration
View all HP StorageWorks XP12000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Operating specifications This section provides some general specifications. For complete specifications, see the system site preparation guide, available on the HP XP Disk Array website: http://h18006.www1.hp.com/storage/xparrays.html Temperature Table 4 Temperature specifications Temperature range type Range Recommended operating temperature range Operating temperature Nonoperating temperature range Shipping and storage temperature (product packed in factory packing) Temperature shock immunity (maximum rate of temperature change) Over-temperature warning Over-temperature shutdown 21 to 24 degrees C, 70 to 75 degrees F 16 to 32 degrees C, 61 to 89 degrees F -10 to +43 degrees C, 14 to 109 degrees F -25 to +60 degrees C, -13 to +140 degrees F 10 degrees C per hour, 18 degrees F per hour At 40 degrees C, 104 degrees F At 60 degrees C, 140 degrees F Humidity Protect the disk array from excessive humidity. You should not observe condensation in or around the product under any conditions. There is no procedure for recovery from moisture condensation. Table 5 Humidity specifications Humidity range type Recommended operating humidity range at 22 degrees C (71 degrees F) Operating humidity range at 22 degrees C (71 F) Nonoperating humidity range Shipping and storage humidity range (product packed in factory packing) Noncondensing relative humidity (RH) 50% to 55% 20% to 80% 8% to 90% 5% to 95% Mechanical vibration Maximum operating acceleration is 0.05G at a frequency range of 10 to 300 Hz. 32 HP XP12000 operations