HP StoreOnce 4420 HP StoreOnce Conversion from 2.x.x software to 3.4.x (or lat - Page 8

Network Support The 3.4.x (or later) software supports a similar set of configuration modes for both 1GbE and 10GbE networks, significant differences being: • Configuration of networking is currently via the StoreOnce CLI interface only • IPv6 support is not currently available • A single failover and port aggregation port bonding mode is provided rather than the two discrete modes provided in previous software GUI differences The StoreOnce GUI with 3.4.x (or later) software adopts a cross-HP Storage design and structure, it is identical in layout to the HP StoreOnce B6200 Backup system and similar to other storage products from HP, enabling easy and familiar administration experience. There are some features that existed in the GUI with 2.x.x software that are now only present in the CLI with 3.4.x (or later) software, the main ones being: • Disk storage configuration • Network configuration • SNMP trap configuration • Date and Time, including NTP, configuration • Software upgrade • Localization (the 3.x.x GUI is currently only available in English) NOTE: The StoreOnce GUI and CLI default login username and password are different to 2.x.x software; they are Username=Admin; Password=admin. 8 Introduction