HP Stream 11-r000 Maintenance and Service Guide - Page 50
Reverse this procedure to install the WLAN module., be installed on the antenna connector
View all HP Stream 11-r000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
3. Remove the WLAN module (3) by pulling the module away from the slot at an angle. NOTE: If the WLAN antenna is not connected to the terminal on the WLAN module, a protective sleeve must be installed on the antenna connector, as shown in the following illustration. Reverse this procedure to install the WLAN module. 42 Chapter 5 Removal and replacement procedures
3.
Remove the WLAN module
(3)
by pulling the module away from the slot at an angle.
NOTE:
If the WLAN antenna is not connected to the terminal on the WLAN module, a protective sleeve must
be installed on the antenna connector, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
42
Chapter 5
Removal and replacement procedures