HP Stream 11-r000 Maintenance and Service Guide - Page 52
Reverse this procedure to install the WWAN module., must be installed on the antenna connector
View all HP Stream 11-r000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
3. Remove the WWAN module (3) by pulling the module away from the slot at an angle. NOTE: If the WWAN antenna is not connected to the terminal on the WWAN module, a protective sleeve must be installed on the antenna connector, as shown in the following illustration. Reverse this procedure to install the WWAN module. 44 Chapter 5 Removal and replacement procedures
3.
Remove the WWAN module
(3)
by pulling the module away from the slot at an angle.
NOTE:
If the WWAN antenna is not connected to the terminal on the WWAN module, a protective sleeve
must be installed on the antenna connector, as shown in the following illustration.
Reverse this procedure to install the WWAN module.
44
Chapter 5
Removal and replacement procedures