HP Stream 11-r000 Maintenance and Service Guide - Page 64
on HP Stream Notebook PC computer models
View all HP Stream 11-r000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
CAUTION: Before turning the display panel upside down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel. b. Lift the top edge of the display panel (1) and swing it up and forward until it rests upside down in front of the display back cover. c. Release the adhesive strip (2) that secures the display panel cable connector to the display panel. d. Disconnect the display panel cable (3) from the display panel. e. Remove the display panel (4). The display panel is available using the following spare part numbers: ● 832674-001 - 11.6-in, HD, AntiGlare, (1366×768), SVA, LED, flat (3.3.6-mm) display panel for use only on HP Stream 11 Pro G2 Notebook PC computer models ● 762229-001 - 11.6-in, HD, AntiGlare, (1366×768), SVA, LED, slim (3.0-mm) display panel for use only on HP Stream Notebook PC computer models ● 834445-001 - 11.6-in, HD, (1366×768), SVA, WLED, flat (3.6-mm) display panel for use only on HP Stream Notebook PC computer models 13. If it is necessary to replace the display hinges: a. Remove the four Phillips PM2.5×3.2 broad head screws (1) that secure the display hinges to the display back cover. b. Remove the two Phillips PM2.0×2.9 broad head screws (2) that secure the display hinges to the display back cover. 56 Chapter 5 Removal and replacement procedures