HP Stream 14-ax000 Maintenance and Service Guide - Page 31

Bottom cover, Remove eight Phillips PM2.5×6.0 screws

Get HP Stream 14-ax000 PDF manuals and user guides View all HP Stream 14-ax000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Bottom cover Description Bottom cover for use in blue models Bottom cover for use in purple models Bottom cover for use in white models Spare part number 905564-001 905690-001 910176-001 Before removing the bottom cover, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. Remove the bottom cover: 1. Position the computer upside down. 2. Peel the two rubber strips off the bottom cover (1) to gain access to the screws underneath. 3. Remove eight Phillips PM2.5×6.0 screws (2) that secure the bottom cover to the computer. 4. Pry around the edges to disengage the bottom cover from the computer (3). 5. Lift the bottom cover from the computer (4). Reverse this procedure to install the bottom cover. Component replacement procedures 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
Bottom cover
Description
Spare part number
Bottom cover for use in blue models
905564-001
Bottom cover for use in purple models
905690-001
Bottom cover for use in white models
910176-001
Before removing the bottom cover, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
Remove the bottom cover:
1.
Position the computer upside down.
2.
Peel the two rubber strips
off
the bottom cover
(1)
to gain access to the screws underneath.
3.
Remove eight Phillips PM2.5×6.0 screws
(2)
that secure the bottom cover to the computer.
4.
Pry around the edges to disengage the bottom cover from the computer
(3)
.
5.
Lift the bottom cover from the computer
(4)
.
Reverse this procedure to install the bottom cover.
Component replacement procedures
23