HP Stream 14-ax000 Maintenance and Service Guide - Page 32

Battery, Remove the two PM2.0×6.0 screws

Get HP Stream 14-ax000 PDF manuals and user guides View all HP Stream 14-ax000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Battery Description Battery, 3-cell, 41-WHr, 3.615-AHr, Li-ion Battery cable Spare part number 844203-855 905566-001 Before removing the battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). Remove the battery: 1. Disconnect the battery cable from the system board (1). 2. Remove the three PM2.0×2.5 screws (2) that secure the battery to the computer. 3. Remove the two PM2.0×6.0 screws (3) that secure the connector to the computer. 4. Lift the battery and the connector from the computer (4). 5. Disconnect the connector from the battery (5). 6. If replacing the battery cable, remove the cable from its routing path in the computer (6). Reverse this procedure to install the battery. 24 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
Battery
Description
Spare part number
Battery, 3-cell, 41-WHr, 3.615-AHr, Li-ion
844203-855
Battery cable
905566-001
Before removing the battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
23
).
Remove the battery:
1.
Disconnect the battery cable from the system board
(1)
.
2.
Remove the three PM2.0×2.5 screws
(2)
that secure the battery to the computer.
3.
Remove the two PM2.0×6.0 screws
(3)
that secure the connector to the computer.
4.
Lift the battery and the connector from the computer
(4)
.
5.
Disconnect the connector from the battery
(5)
.
6.
If replacing the battery cable, remove the cable from its routing path in the computer
(6)
.
Reverse this procedure to install the battery.
24
Chapter 5
Removal and replacement procedures for Authorized Service Provider parts