HP Stream 14-ax000 Maintenance and Service Guide - Page 49
Power button board, Disconnect the cable from the power button board
View all HP Stream 14-ax000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Power button board Description Power button board Power button board cable Spare part number 905579-001 905562-001 Before removing the power button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Disconnect the battery cable from the system board (see Battery on page 24). 6. Remove the display assembly (see Display assembly on page 35). Remove the power button board: 1. Disconnect the cable from the power button board (1). 2. Remove the PM2.0×3.0 screw (2) that secures the power button board to the computer. 3. Lift the board from the computer (3). Reverse this procedure to install the power button board. Component replacement procedures 41