HP Stream 14-ax000 Maintenance and Service Guide - Page 36
RTC battery, Disconnect the battery cable from the system board see
View all HP Stream 14-ax000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
RTC battery Description RTC battery Spare part number 857380-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Disconnect the battery cable from the system board (see Battery on page 24). To remove the RTC battery: ▲ Disconnect the RTC battery cable from the system board (1), and then lift the RTC battery from the computer (2). NOTE: The RTC battery is secured with double-sided tape. Reverse this procedure to install the RTC battery. 28 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts